| Wind Watch is a registered educational charity, founded in 2005. |
Wind turbine collapse wreckage in Nova Scotia combed for clues of cause
Credit: Cape Breton wind turbine collapses during maintenance | Department of Labour working closely with turbine's manufacturer to investigate collapse | By Brett Ruskin, CBC News | Posted: Aug 24, 2016 | www.cbc.ca ~~
Translate: FROM English | TO English
Translate: FROM English | TO English
One week after an 80-metre wind turbine collapsed in Cape Breton, there is still no clear indication of what caused what’s believed to be the first catastrophic failure of its kind in Canada.
Officials with Enercon Canada Inc. were at the scene of the tangled heap on Wednesday afternoon, loading equipment onto flatbed tractor-trailers near the site of the collapsed turbine. The Montreal-based company is responsible for building and maintaining the 11 turbines located in Point Tupper, N.S.
Maintenance crews were replacing a “major component” on Aug. 17 when “an incident occurred,” said Karine Asselin, an Enercon spokesperson.
All the workers were able to evacuate the area before the 80-metre tower buckled at the midway point and collapsed. (CBC)
Tools, parts and equipment had been brought in from Germany to perform the regular maintenance, she said.
All the workers were able to evacuate the area before the 80-metre tower buckled at the midway point and collapsed.
The Canadian Wind Energy Association issued a statement saying it was not aware of a similar failure among the more than 6,000 wind turbines in Canada.
Provincial department investigating
In addition to Enercon, the provincial government is also involved. Scott Nauss with Nova Scotia’s Department of Labour and Advanced Education confirmed the government was notified last week of the incident.
He said provincial staff are working with the company to determine if there were any safety violations. All companies in Nova Scotia must legally follow basic standards, including ensuring that workers are properly trained, working in a safe manner and using equipment and safety gear that is functioning properly.
Nauss said it is too early in the process to tell if there were any violations.
Company has installed nearly 1,000 turbines in Canada
The 10 other turbines at the site, built in 2010, were not affected by the collapse according to Renewable Energy Services Ltd., which owns and operates the farm.
The tower that holds each turbine, called the E82, is about 80 metres tall and the blades that extend from the turbine are about 40 metres long.
Enercon Canada, a subsidiary of Enercon GmbH in Germany, has installed nearly 1,000 wind turbines in seven provinces in the past 15 years. Company officials said this is the first time that a collapse has occurred.
“This incident did not occur during regular operations and is undoubtedly an isolated one,” Enercon said in a statement released Aug. 19.
With files from The Canadian Press
This article is the work of the source indicated. Any opinions expressed in it are not necessarily those of National Wind Watch.
The copyright of this article resides with the author or publisher indicated. As part of its noncommercial educational effort to present the environmental, social, scientific, and economic issues of large-scale wind power development to a global audience seeking such information, National Wind Watch endeavors to observe “fair use” as provided for in section 107 of U.S. Copyright Law and similar “fair dealing” provisions of the copyright laws of other nations. Send requests to excerpt, general inquiries, and comments via e-mail.
| Wind Watch relies entirely on User Funding |
 (via Stripe) |
 (via Paypal) |
Share:
[ Short URL: https://wind-watch.org/news/?p=79100 ]
