Wind Watch is a registered educational charity, founded in 2005. |
Wind industry could take toll on Kansas highways
Credit: By Christine Metz, Lawrence Journal-World, www2.ljworld.co 24 March 2011 ~~
Translate: FROM English | TO English
Translate: FROM English | TO English
As the wind industry in Kansas booms, state highway officials are looking at how to better manage the trucks needed to carry pieces of the massive wind turbines.
Today, Kansas roadways see seven times more trucks carrying extremely heavy loads of wind tower components than they did five years ago.
“It’s a growing sector of the manufacturing sector, not only in Kansas but other central states,” said John Maddox, Kansas Department of Transportation’s rail and freight program manager.
In 2010, KDOT recorded more than 7,500 truck loads of 150,000 pounds or more carrying wind tower components. In 2006, the number of these extremely heavy loads was less than a 1,000.
Some of the loads are coming from out of state and heading toward Kansas wind farms under construction and others are just passing through the state, Maddox said.
Traffic is only expected to increase.
In December, Siemens Energy opened a wind turbine manufacturing plant in Hutchinson. The plant is building nacelles, a 90-ton, school-bus sized piece of equipment that sits at the top of the wind tower and is the engine of the turbine.
Other companies have plans of opening wind manufacturing facilities in Kansas, including one in Ottawa.
And the building of more wind farms is being proposed throughout Kansas, adding to the nine farms that already operate.
While a growing wind industry is a positive for the Kansas economy, the heavy loads needed to get wind turbines to their destinations will damage the roads over time.
“We do keep it in the back of our minds,” said John Culbertson, a bridge evaluation engineer at KDOT.
That impact to the roadways is one of the reasons KDOT is updating its permitting process of routing overweight and oversized loads from a paper system to one that uses web-based software.
As part of the permitting process, KDOT analyzes what routes the trucks should take to avoid bridges that can’t hold the weight, low underpasses and narrow construction zones. In 2010, KDOT issued 70,000 permits for oversized or overweight loads. More than a 1,000 of those permits were for overweight trucks carrying wind tower components.
The new software system, known as Kansas Truck Routing and Intelligent Permitting System, will automatically generate and evaluate alternate routes for large loads.
“There is a concern,” Culbertson said of the heavy wind turbine loads that are carried over Kansas roads. “This is one of the reasons for the new software. It will help us track and plan a little bit better.”
This article is the work of the source indicated. Any opinions expressed in it are not necessarily those of National Wind Watch.
The copyright of this article resides with the author or publisher indicated. As part of its noncommercial educational effort to present the environmental, social, scientific, and economic issues of large-scale wind power development to a global audience seeking such information, National Wind Watch endeavors to observe “fair use” as provided for in section 107 of U.S. Copyright Law and similar “fair dealing” provisions of the copyright laws of other nations. Send requests to excerpt, general inquiries, and comments via e-mail.
Wind Watch relies entirely on User Funding |
(via Paypal) |
(via Stripe) |
Share: